全球海洋潜水旅游目的地分布特征及其自然影响因素研究

以全球海洋潜水旅游目的地为研究对象, 借助地理信息系统(GIS), 运用基尼系数、层次分析法(AHP)等方法, 研究全球海洋潜水旅游目的地的分布特征及其自然影响因素. 结果显示: (1)全球海洋潜水旅游目的地的分布数量由低纬向高纬递减; 洲际分布呈现高度集中, 主要聚集区是东亚与东南亚、地中海-红海以及加勒比海沿岸, 太平洋、印度洋与大西洋为散点分布. (2)影响海洋潜水旅游目的地的自然因素主要为海洋地形、海水温度、陆地气温、洋流、潮汐、海水能见度、珊瑚礁等, 相关因素影响程度与广度因海域呈现地域综合导控, 使得海洋潜水旅游目的地主要聚集在热带海域等地.     

正电子冲击下氦电离三重微分截面的理论计算

我们发展了一种正电子碰撞原子电离的畸变波Born近似方法， 在这个方法中，正负电子偶素通道通过一个ab initio的光学势附加到入射粒子和靶的相互作用势上，且通道对电离作用被第一次被考虑在正电子碰撞原子电离的过程中. 应用这个方法计算了在50 eV入射能量范围氦的电离的三重微分截面，计算结果和实验数据很好的符合.     

Synthesis of tertiary amine‐based pH‐responsive polymers by RAFT Polymerization

Well‐defined tertiary amine‐based pH‐responsive homopolymers and block copolymers were synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization using 4‐cyanopentanoic acid dithiobenzoate (CPAD) as the RAFT agent for homopolymers and a poly(ethylene glycol) (PEG) macro‐RAFT agent for the block copolymers. ¹H NMR and gel permeation chromatography results confirmed the successful synthesis of these homopolymers and block copolymers. Kinetics studies indicated that the formation of both the homopolymers and the block copolymers were well defined. The pKa titration experiments suggested that the homopolymers and the related block copolymers have a similar pKa. The dynamic light scattering investigation showed that all of the block copolymers underwent a sharp transition from unimers to micelles around their pKa and the hydrodynamic diameter (D_h) was not only dependent on the molecular weight but also on the composition of the block copolymers. The polymer solution of PEG‐b‐PPPDEMA formed the largest micelle compare to the PEG‐b‐PDPAEMA and PEG‐b‐PDBAEMA with a similar molecular weight. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1010–1022     

Effects of ultrasound on the desulfurization performance of hot coal gas over Zn-Mn-Cu supported on semi-coke sorbent prepared by high-pressure impregnation method

Zn-Mn-Cu/SC(U) sorbent was hydrothermally synthesized by ultrasound-assisted high-pressure impregnation method with semi-coke(SC)as support and the mixed solution of zinc nitrate,manganese nitrate and copper nitrate as active component precursors.The desulfurization performances of hot coal gas on the prepared sorbent at a mid-temperature of 500°C were tested in fixed-bed reactor.Morphology and pore structure of the prepared sorbent were also characterized by TEM,N2adsorption/desorption isotherms and XRD.For comparison,the sorbent of Zn-Mn-Cu/SC prepared by conventional high-pressure impregnation was also evaluated and characterized in order to study the effects of ultrasound treatment.Zn-Mn-Cu/SC(U) sorbent prepared by high-pressure impregnation under ultrasound-assisted condition showed a better desulfurization performance than Zn-Mn-Cu/SC.It could remove H2 S from 1000×10-6m3/m3 to 0.1×10-6m3/m3 at 500°C and maintained for 12.5 h with the sulfur capacity of 7.74%,in which both the breakthrough time and sulfur capacity were about 32% and 51% higher than those of Zn-Mn-Cu/SC sorbent.The introduction of ultrasound during high-pressure impregnation process greatly improved the morphology and pore structure of the sorbent.The ultrasonic treatment made particle size of active components smaller and made them more evenly disperse on semi-coke support,which provided more opportunities to contact with H2S in coal-based gases.However,there were no any difference in compositions and existing forms of active components on the Zn-Mn-Cu/SC and Zn-Mn-Cu/SC(U) sorbents.     

PbSe/TiO2同轴异质结纳米管的制备及光催化性能

通过溶液法合成了PbSe/TiO2复合纳米管,并对其进行了微观形貌、晶体结构等的表征。结果表明,制得的样品是由PbSe和TiO2两种材料构成的复合材料,致密、均匀的TiO2薄膜包覆在PbSe纳米管表面。以氙灯为模拟光源,通过对甲基橙的降解研究了PbSe/TiO2复合纳米管的光催化性能。结果显示,PbSe与TiO2之间形成的异质结使PbSe/TiO2复合纳米管具有较高的光催化性能,比纯PbSe纳米管的催化降解率提高了约4.5倍。另外,对PbSe/TiO2复合纳米管光催化稳定性也进行了研究。     

基于PLC 的中央空调制冷系统变频控制研究

针对现有中央空调系统能源消耗严重的现状,基于可编程逻辑控制器(Programmable Logic Controller,PLC)对中央空调系统进行变流量节能改造。分析改造后中央空调系统的结构组成和变频运行原理,并提出适用于冷冻水泵和冷却水泵的分段速温差控制和PID温差控制设计方案。控制硬件选用三菱FX3U系列PLC和台达VFD-EL变频器,软件选用GX Work2编程软件及力控组态软件。将控制方案进行实验验证,实验结果表明,所设计的两种控制策略不仅跟随系统末端负荷变化快速达到稳定运行状态,提高运行能效比,而且节能效果显著,节能率分别为40.2%和48.7%。     

中国先进研究堆中子科学平台发展现状及展望

依托中国先进研究堆(CARR)高通量中子源，建成了初具规模的中子科学平台，具备中子散射、中子成像和中子活化分析等多种研究技术。其中，中子散射技术包括中子衍射、小角中子散射及中子反射、非弹性中子散射，可以用于分析材料微观结构和动力学性质；热中子成像和冷中子成像可以用于材料内部缺陷等无损检测；中子活化分析系统可以用于物质内核素成分分析。目前已建成和在建中子谱仪共计19台，并初步配备了样品环境装置，为相关应用研究提供了条件基础，可为我国物理、化学、材料科学、生命科学、能源和环境等领域基础研究及工业应用提供重要技术支撑。CARR中子科学平台始终坚持合作共享对外开放的宗旨，将继续为国内外用户提供优质中子技术，服务基础科学前沿和国家重大创新需求研究。     

可控化学腐蚀法制备碳化硅量子点及其表面修饰

通过可控的化学腐蚀法完成了对碳化硅量子点的制备,而后经超声空化作用及高速层析裁剪获得水相的碳化硅量子点溶液,利用化学偶联法,一步实现了SiC量子点的表面物化特性调控.通过对制备工艺参数调整前后量子点微观形貌、光谱特性的表征,结果表明:腐蚀次数、腐蚀剂组分及腐蚀剂配比是影响碳化硅量子点光致发光效率的主要因素,调整腐蚀次数与腐蚀剂组分的配比,同时加入偶联剂分析纯硫酸,当以V(HF):V(HNO3):V(H2 SO4)=6:1:1(体积比)的组分及比例腐蚀球磨后的β-SiC粉体时,制备出的水相碳化硅量子点光致发光相对强度最为理想.同时对碳化硅量子点表面巯基的形成机制与修饰稳定性进行了初步分析.     

内爆驱动式超高速发射技术的初步研究

为获得10 km/s左右的超高速发射能力,以内爆发射器为研究对象,利用AUTODYN 2D软件对口径为8 mm的内爆发射器进行有限元仿真分析,获得了典型状态下的弹丸发射速度。研制了口径为8 mm的内爆发射器,并在压缩管中填充5 MPa氦气进行实验,分别获得了0.55 g铝合金弹丸7.95 km/s和0.37 g镁合金弹丸10.28 km/s的发射速度,与有限元仿真计算结果的速度偏差分别为15.3%和3.7%。结果表明,设计的内爆发射器具备10 km/s发射能力,满足空间碎片撞击和防护研究的超高速发射需求。